Looking back at my camera roll from July, I’m struck by how much of it is… practical. A receipt here, a car park there, a Windows install stuck at 35% for what felt like a geological age. But scattered between the admin were a few proper moments, and those are the ones worth writing about.
Life Updates
A night out at Revolución de Cuba
Mid-July brought a night out with the lads, and the evidence is right here. Nobody in that photo booth was taking things seriously, and the strip is the better for it. Four frames, four levels of escalating silliness, and by the last one I’m just sticking my tongue out at the camera.
It’s easy to let months slip by in a routine of work, house jobs and screens. Nights like this are a good reminder to actually go and be daft with people you like. I’m keeping the strip.

The garden after dark
Late in the month I took a walk out to the garden once the light had gone. The fence lights were glowing along the back, the shed was a dark shape in the corner, and the bird feeders were standing quietly on their pole. It’s a small thing, but the garden looks completely different at night, and I like it.
A couple of days later there was a tidy-up too, with a pile of bin bags waiting by the wall. Not glamorous, but a clear-out does wonders for a space, and for the head.

Tech Corner
Crimping your own Ethernet cables (and getting it right)
This month I dug the crimping tool out again. Making your own patch cables is oddly satisfying, and it means you get exactly the length you need instead of a tangle of 2m cables stuffed behind a rack. Here are the things that make the difference between a cable that works and one that gives you gremlins:

- Pick a standard and stick to it. Use T568B on both ends for a normal straight-through cable. Mixing standards gives you a crossover, and that’s rarely what you want.
- Untwist as little as possible. Keep the twists right up to the connector, ideally under about 13mm untwisted. Too much untwisting is a classic cause of crosstalk and flaky gigabit links.
- Trim the wires flat and push them all the way in. Look at the end of the connector before you crimp. You should see copper right at the tip of every conductor.
- Check the cable jacket sits inside the connector so the strain relief clamps down on it, not just the wires.
- Test every cable. A cheap continuity tester takes seconds and saves an evening of wondering why a device only negotiates 100Mbps.
Also worth knowing: solid-core cable and stranded cable use different connectors. Solid-core is for fixed runs, and stranded is better for patch leads that get moved around. Using the wrong plug type is a common reason for a crimp that seems fine but fails later.
Bonus tip: keep your home network documented
While you’re up to your elbows in cables, label them. A bit of tape at each end with a short name (or a number matching a simple note in your wiki or a self-hosted notes app) saves a huge amount of guesswork down the line. Future you will be grateful.
Closing Thoughts
July wasn’t a big month, and I’m fine with that. A night of laughing with friends, a bit of tinkering with cables, and a quiet evening in the garden is a pretty good summer. Here’s to August: hopefully a bit more sunshine, a few more projects finished, and at least one more photo booth strip.

Be First to Comment