Skip to content

March 2026: Soldering Irons, Spooky Mini Golf, and a Cloud That Lives on My Desk

March is that funny in-between month, isn’t it? Not quite winter, not quite spring, but you can feel the days stretching out and the urge to actually do things creeping back in. Looking back at my camera roll, this one was equal parts soldering fumes and proper days out – which, honestly, is my idea of a balanced month.

Life This Month

The big theme of March? Tinkering. My desk turned into a full-blown electronics bench at points – reels of solder, jumper wires everywhere, and more than one teardown that I swore would “only take ten minutes.” The proudest moment was getting a little ESP-based air quality sensor board flashed and talking to the network. There’s something deeply satisfying about a freshly soldered board that boots first time.

A green ESP-based air quality sensor PCB with a temperature and humidity sensor connector, plugged in via USB-C
A hand-soldered ESP-powered air quality sensor – freshly flashed and ready to join the home network

Not everything stayed at the workbench, though. We got out and about plenty, and the highlight had to be a trip to Ghetto Golf in Newcastle – their horror-themed adventure golf course. Picture the usual crazy golf, but dimly lit, covered in graffiti, and with the occasional caged clown watching you line up your putt. Equal parts hilarious and genuinely unsettling – I’m fairly sure I missed an easy hole because something jumped out at me.

Putting on a glowing adventure golf course at night beside a caged clown animatronic at Ghetto Golf Newcastle
Lining up a putt while a clown judges your technique – the horror course at Ghetto Golf, Newcastle

There was a fair bit of the classic stuff too – a few games of neon bowling, a wander round a market, and the usual home cooking on the nights in. But it’s the mix that made March feel good: heads-down maker time balanced with actually getting out the door.

Tech Corner

Speaking of the workbench – here’s where a lot of those evenings went. That glowing RGB “cloud” over the desk has become a bit of a signature, but the real action is on the screens.

Home office desk at night with ultrawide and laptop screens showing a Coolify deployment, a mechanical keyboard, soldering gear, and an RGB LED cloud glowing overhead
The home lab mid-deployment – Coolify doing the heavy lifting while the RGB cloud sets the mood

Self-Hosting Tip: Give Coolify a Go

If you squint at that middle screen, you’ll spot Coolify – an open-source, self-hostable platform that gives you a Heroku/Netlify-style deployment experience on your own hardware. Point it at a Git repo, and it’ll build and deploy your app, manage databases, handle SSL certificates, and roll out updates – all from a clean web UI. For a home lab it’s genuinely a game-changer compared to hand-rolling Docker Compose files for everything.

Getting started is refreshingly simple:

curl -fsSL https://cdn.coollabs.io/coolify/install.sh | bash

Run that on a spare server or VPS, open the dashboard, and you’re away. One tip from experience: give it more disk than you think you’ll need – build artifacts and old images add up fast, and you don’t want a deployment failing at 2am because you ran out of space.

Home Automation Tip: Cheap Sensors, Big Wins

Back to that little sensor board. If you run Home Assistant, one of the most satisfying upgrades is feeding it real environmental data – temperature, humidity, air quality – from cheap ESP-based sensors dotted around the house. The trick is to publish over MQTT and let Home Assistant auto-discover the devices.

If you’d rather not solder anything yourself, flashing an off-the-shelf board with ESPHome is the path of least resistance – you describe the sensor in a few lines of YAML and it generates the firmware for you:

sensor:
  - platform: dht
    pin: GPIO2
    temperature:
      name: "Office Temperature"
    humidity:
      name: "Office Humidity"
    update_interval: 60s

Flash that, and the readings show up in Home Assistant automatically. Suddenly you can trigger the fan when the office gets stuffy, or just enjoy some pretty graphs – both equally valid uses of your time.

Looking Ahead

With the weather finally turning, April’s shaping up to be a bit more outdoorsy – though I’ve got a couple of half-finished projects on the bench that are quietly demanding attention first. There’s always one more board to flash, one more service to deploy. But that’s half the fun, isn’t it?

Here’s to longer days and fewer burnt fingertips. See you next month.

Published inPersonal

Be First to Comment

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.